General Information
Design Futures Studio: City Lab is a studio-based subject engaging in experimental design projects at all architectural scales, selected for their opportunity to investigate pressing contemporary issues related to the occupation of the urban realm, environmental sustainability, emerging technologies, or other matters of sociocultural or disciplinary concern. Students will engage in an inclusive studio environment to develop solutions in team-based collaborative studio work. This subject asks students to explore the agency of architectural form, material, technique, technology, and meaning in a variety of scenarios.
Design proposals are expected to critically engage with a contemporary urban and architectural discourse through project work that exhibits detailed integration of design process work and conceptual endeavour. Projects will be explored through both manual and digital techniques, both collectively and on an individual basis. Output is focused on collaborative methods of craftsmanship in both 2D and 3D outcomes including the physical construction of models and/or large scale constructions for inhabitation utilising the Architecture Fabrication and Research Workshop.
-
Details
Academic unit: Faculty of Society & Design Subject code: ARCH13-130 Subject title: Design Futures Studio – City Lab Subject level: Undergraduate Semester/Year: September 2022 Credit points: -
Delivery & attendance
Timetable: https://bond.edu.au/timetable Delivery mode: Standard Workload items: - Studio: x12 (Total hours: 36) - Weekly studio led exercises
- Studio: x12 (Total hours: 60) - Weekly studio led exercises
- Personal Study Hours: x12 (Total hours: 84) - Personal Project Work
Attendance and learning activities: No less than 80% attendance must be recorded to pass the subject. -
Resources
Prescribed resources: No Prescribed resources.
After enrolment, students can check the Books and Tools area in iLearn for the full Resource List.iLearn@Bond & Email: iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student. To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au
Class recordings: The primary workload items for this subject will be recorded for the purpose of revision.
These recordings are not a substitute for attending classes. Students are encouraged to attend all sessions as there may be instances where a session is not recorded due to the presence of a guest speaker, the inclusion of sensitive or protected content, or technical issues. Students are advised not to rely solely on these recordings for revision.
See the Recording policy for further details.
| Academic unit: | Faculty of Society & Design |
|---|---|
| Subject code: | ARCH13-130 |
| Subject title: | Design Futures Studio – City Lab |
| Subject level: | Undergraduate |
| Semester/Year: | September 2022 |
| Credit points: |
| Timetable: | https://bond.edu.au/timetable |
|---|---|
| Delivery mode: | Standard |
| Workload items: |
|
| Attendance and learning activities: | No less than 80% attendance must be recorded to pass the subject. |
| Prescribed resources: | No Prescribed resources. After enrolment, students can check the Books and Tools area in iLearn for the full Resource List. |
|---|---|
| iLearn@Bond & Email: | iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student. To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au |
| Class recordings: | The primary workload items for this subject will be recorded for the purpose of revision. These recordings are not a substitute for attending classes. Students are encouraged to attend all sessions as there may be instances where a session is not recorded due to the presence of a guest speaker, the inclusion of sensitive or protected content, or technical issues. Students are advised not to rely solely on these recordings for revision. See the Recording policy for further details. |
Enrolment requirements
| Requisites: |
Nil |
|---|---|
| Assumed knowledge: |
Assumed knowledge is the minimum level of knowledge of a subject area that students are assumed to have acquired through previous study. It is the responsibility of students to ensure they meet the assumed knowledge expectations of the subject. Students who do not possess this prior knowledge are strongly recommended against enrolling and do so at their own risk. No concessions will be made for students’ lack of prior knowledge. Assumed Prior Learning (or equivalent):
Knowledge and design ability equivalent to that acquired through 1st year design studios (Creative Design Studios in Jan/May/Sept) is required. |
| Restrictions: |
Nil |
Assurance of learning
Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.
At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.
Program Learning Outcomes (PLOs)
Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.
Subject Learning Outcomes (SLOs)
On successful completion of this subject the learner will be able to:
- Ability to speculate, critically analyse, test and trial various conceptual ideas using a variety of media and methods in response to a specific complex challenge.
- Ability to critically analyse, research and develop a contextually-specific architectural response.
- Considered response to and understanding of contextual fabric, built form and urban realm.
- Understanding and integration of design concepts in response to technological, material, and performative challenges.
- Develop verbal presentation skills and comprehensive 2D and 3D techniques.
- Ability to work collaboratively and contribute constructively to a team environment.
Generative Artificial Intelligence in Assessment
The University acknowledges that Generative Artificial Intelligence (Gen-AI) tools are an important facet of contemporary life. Their use in assessment is considered in line with students’ development of the skills and knowledge which demonstrate learning outcomes and underpin study and career success. Instructions on the use of Gen-AI are given for each assessment task; it is your responsibility to adhere to these instructions.
-
Assessment details
Type Task % Timing* Outcomes assessed Creative Project Creative design project 70% Week 12 1,2,3,4,5,6 Portfolio Portfolio of process work, final presentation work, and self-reflection 30% Week 14* 1,2,3,4,5 - * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
Pass requirement
No less than 80% attendance must be recorded to pass the subject.
-
Assessment criteria
Assessment criteria
High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking. Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas. Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above. Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment. Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines. Quality assurance
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
| Type | Task | % | Timing* | Outcomes assessed |
|---|---|---|---|---|
| Creative Project | Creative design project | 70% | Week 12 | 1,2,3,4,5,6 |
| Portfolio | Portfolio of process work, final presentation work, and self-reflection | 30% | Week 14* | 1,2,3,4,5 |
- * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
Pass requirement
No less than 80% attendance must be recorded to pass the subject.
Assessment criteria
| High Distinction | 85-100 | Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking. |
|---|---|---|
| Distinction | 75-84 | Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas. |
| Credit | 65-74 | Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above. |
| Pass | 50-64 | Usually awarded to students whose performance meets the requirements set for work provided for assessment. |
| Fail | 0-49 | Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines. |
Quality assurance
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
Study Information
Submission procedures
Students must check the iLearn@Bond subject site for detailed assessment information and submission procedures.
Policy on late submission and extensions
A student who has not established a basis for an extension in compliance with University and Faculty policy either by 1) not applying before the assessment due date or 2) by having an application rejected due to failure to show a justifiable cause for an extension, will receive a penalty on assessment submitted after its due date. The penalty will be 10% of marks awarded to that assessment for every day late, with the first day counted after the required submission time has passed. No assessment will be accepted for consideration seven calendar days after the due date. Where a student has been granted an extension, the late penalty starts from the new due date and time set out in the extension.
Academic Integrity
The University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.
Bond University utilises Originality Reporting software to inform academic integrity.Feedback on assessment
Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.
Accessibility and Inclusion Support
If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.
Additional subject information
Subject curriculum
-
Design Studio Introduction
Introduction to the Design Futures Studio - City Lab focus.
SLOs included
- Ability to critically analyse, research and develop a contextually-specific architectural response.
- Considered response to and understanding of contextual fabric, built form and urban realm.
- Understanding and integration of design concepts in response to technological, material, and performative challenges.
-
Site Analysis
Environmental and urban analysis of the given context for the design project.
SLOs included
- Ability to critically analyse, research and develop a contextually-specific architectural response.
- Considered response to and understanding of contextual fabric, built form and urban realm.
- Ability to work collaboratively and contribute constructively to a team environment.
-
Precedent Studies
Critical consideration and presentation of design precedents.
SLOs included
- Ability to speculate, critically analyse, test and trial various conceptual ideas using a variety of media and methods in response to a specific complex challenge.
- Ability to critically analyse, research and develop a contextually-specific architectural response.
- Considered response to and understanding of contextual fabric, built form and urban realm.
- Understanding and integration of design concepts in response to technological, material, and performative challenges.
- Develop verbal presentation skills and comprehensive 2D and 3D techniques.
-
Design Studio
Conceptual design through to design development and presentation.
SLOs included
- Ability to speculate, critically analyse, test and trial various conceptual ideas using a variety of media and methods in response to a specific complex challenge.
- Ability to critically analyse, research and develop a contextually-specific architectural response.
- Considered response to and understanding of contextual fabric, built form and urban realm.
- Understanding and integration of design concepts in response to technological, material, and performative challenges.
- Develop verbal presentation skills and comprehensive 2D and 3D techniques.