General Information
This subject provides students from non-engineering backgrounds with a basic understanding of building structures and soil mechanics. Fundamental concepts of structural engineering such as calculation of forces and reactions, resolution of forces in frames, bending moments and shear forces are introduced. Structural connections are detailed. Different ground conditions are identified and the characteristics of various foundation materials are examined. The design and adequacy of various footing systems in different materials are investigated.
-
Details
Academic unit: Faculty of Society & Design Subject code: SDCM71-316 Subject title: Structures and Soil Mechanics Subject level: Postgraduate Semester/Year: September 2017 Credit points: 10.000 -
Delivery & attendance
Timetable: https://bond.edu.au/timetable Delivery mode: Intensive Workload items: - Seminar: x2 (Total hours: 14) - Seminar 1
- Seminar: x2 (Total hours: 14) - Seminar 2
- Seminar: x2 (Total hours: 14) - Seminar 3
- Personal Study Hours: x12 (Total hours: 78) - Recommended Study Hours
Attendance and learning activities: Attend all sessions (Lectures and Tutorials). Most sessions build on the work on the previous one. It is difficult to recover if you miss a session. Attendance in tutorials and labs will be monitored, and could affect the final mark in this subject. -
Resources
Prescribed resources: Books
- Derek Seward (2014). Understanding Structures: Analysis, Materials, Design. 5th, Suffolk Palgrave Macmillian
iLearn@Bond & Email: iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student. To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au
| Academic unit: | Faculty of Society & Design |
|---|---|
| Subject code: | SDCM71-316 |
| Subject title: | Structures and Soil Mechanics |
| Subject level: | Postgraduate |
| Semester/Year: | September 2017 |
| Credit points: | 10.000 |
| Timetable: | https://bond.edu.au/timetable |
|---|---|
| Delivery mode: | Intensive |
| Workload items: |
|
| Attendance and learning activities: | Attend all sessions (Lectures and Tutorials). Most sessions build on the work on the previous one. It is difficult to recover if you miss a session. Attendance in tutorials and labs will be monitored, and could affect the final mark in this subject. |
| Prescribed resources: | Books
|
|---|---|
| iLearn@Bond & Email: | iLearn@Bond is the online learning environment at Bond University and is used to provide access to subject materials, lecture recordings and detailed subject information regarding the subject curriculum, assessment and timing. Both iLearn and the Student Email facility are used to provide important subject notifications. Additionally, official correspondence from the University will be forwarded to students’ Bond email account and must be monitored by the student. To access these services, log on to the Student Portal from the Bond University website as www.bond.edu.au |
Enrolment requirements
| Requisites: |
Nil |
|---|---|
| Assumed knowledge: |
Assumed knowledge is the minimum level of knowledge of a subject area that students are assumed to have acquired through previous study. It is the responsibility of students to ensure they meet the assumed knowledge expectations of the subject. Students who do not possess this prior knowledge are strongly recommended against enrolling and do so at their own risk. No concessions will be made for students’ lack of prior knowledge.
|
| Restrictions: |
Nil |
Assurance of learning
Assurance of Learning means that universities take responsibility for creating, monitoring and updating curriculum, teaching and assessment so that students graduate with the knowledge, skills and attributes they need for employability and/or further study.
At Bond University, we carefully develop subject and program outcomes to ensure that student learning in each subject contributes to the whole student experience. Students are encouraged to carefully read and consider subject and program outcomes as combined elements.
Program Learning Outcomes (PLOs)
Program Learning Outcomes provide a broad and measurable set of standards that incorporate a range of knowledge and skills that will be achieved on completion of the program. If you are undertaking this subject as part of a degree program, you should refer to the relevant degree program outcomes and graduate attributes as they relate to this subject.
Subject Learning Outcomes (SLOs)
On successful completion of this subject the learner will be able to:
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
- Understand the properties of different foundation materials and be able to design simple footings and retaining walls to suit.
- Understand the basis of the structural design of concrete, steel and timber elements and be able to do simple calculations relating to the design of such elements.
- Understand how trusses perform and be able to perform basic calculations to discover the forces within truss elements.
- Be able to determine bracing rquirements for residential buildings.
- Understand how multi-storey buildings behave structurally.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
Generative Artificial Intelligence in Assessment
The University acknowledges that Generative Artificial Intelligence (Gen-AI) tools are an important facet of contemporary life. Their use in assessment is considered in line with students’ development of the skills and knowledge which demonstrate learning outcomes and underpin study and career success. Instructions on the use of Gen-AI are given for each assessment task; it is your responsibility to adhere to these instructions.
-
Assessment details
Type Task % Timing* Outcomes assessed Paper-based Examination (Closed)^ Final exam 50.00% Final Examination Period 1,2,3,4,5,6,7 Essay Assignment 1 25.00% Week 6 1,2,3,5,7 Written Report Assignment 2 25.00% Week 11 4,5,6,7 - ^ Students must pass this assessment to pass the subject
- * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
Pass requirement
Students must achieve a minimum 50% on the final exam as well as minimum 50% cumulative total for all assessment items to be eligible to pass this subject.
-
Assessment criteria
Assessment criteria
High Distinction 85-100 Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking. Distinction 75-84 Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas. Credit 65-74 Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above. Pass 50-64 Usually awarded to students whose performance meets the requirements set for work provided for assessment. Fail 0-49 Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines. Quality assurance
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
| Type | Task | % | Timing* | Outcomes assessed |
|---|---|---|---|---|
| Paper-based Examination (Closed)^ | Final exam | 50.00% | Final Examination Period | 1,2,3,4,5,6,7 |
| Essay | Assignment 1 | 25.00% | Week 6 | 1,2,3,5,7 |
| Written Report | Assignment 2 | 25.00% | Week 11 | 4,5,6,7 |
- ^ Students must pass this assessment to pass the subject
- * Assessment timing is indicative of the week that the assessment is due or begins (where conducted over multiple weeks), and is based on the standard University academic calendar
- C = Students must reach a level of competency to successfully complete this assessment.
Pass requirement
Students must achieve a minimum 50% on the final exam as well as minimum 50% cumulative total for all assessment items to be eligible to pass this subject.
Assessment criteria
| High Distinction | 85-100 | Outstanding or exemplary performance in the following areas: interpretative ability; intellectual initiative in response to questions; mastery of the skills required by the subject, general levels of knowledge and analytic ability or clear thinking. |
|---|---|---|
| Distinction | 75-84 | Usually awarded to students whose performance goes well beyond the minimum requirements set for tasks required in assessment, and who perform well in most of the above areas. |
| Credit | 65-74 | Usually awarded to students whose performance is considered to go beyond the minimum requirements for work set for assessment. Assessable work is typically characterised by a strong performance in some of the capacities listed above. |
| Pass | 50-64 | Usually awarded to students whose performance meets the requirements set for work provided for assessment. |
| Fail | 0-49 | Usually awarded to students whose performance is not considered to meet the minimum requirements set for particular tasks. The fail grade may be a result of insufficient preparation, of inattention to assignment guidelines or lack of academic ability. A frequent cause of failure is lack of attention to subject or assignment guidelines. |
Quality assurance
For the purposes of quality assurance, Bond University conducts an evaluation process to measure and document student assessment as evidence of the extent to which program and subject learning outcomes are achieved. Some examples of student work will be retained for potential research and quality auditing purposes only. Any student work used will be treated confidentially and no student grades will be affected.
Study Information
Submission procedures
Students must check the iLearn@Bond subject site for detailed assessment information and submission procedures.
Policy on late submission and extensions
A late penalty will be applied to all overdue assessment tasks unless an extension is granted by the subject coordinator. The standard penalty will be 10% of marks awarded to that assessment per day late with no assessment to be accepted seven days after the due date. Where a student is granted an extension, the penalty of 10% per day late starts from the new due date.
Academic Integrity
University’s Academic Integrity Policy defines plagiarism as the act of misrepresenting as one’s own original work: another’s ideas, interpretations, words, or creative works; and/or one’s own previous ideas, interpretations, words, or creative work without acknowledging that it was used previously (i.e., self-plagiarism). The University considers the act of plagiarising to be a breach of the Student Conduct Code and, therefore, subject to the Discipline Regulations which provide for a range of penalties including the reduction of marks or grades, fines and suspension from the University.
Bond University utilises Originality Reporting software to inform academic integrity.Feedback on assessment
Feedback on assessment will be provided to students within two weeks of the assessment submission due date, as per the Assessment Policy.
Accessibility and Inclusion Support
If you have a disability, illness, injury or health condition that impacts your capacity to complete studies, exams or assessment tasks, it is important you let us know your special requirements, early in the semester. Students will need to make an application for support and submit it with recent, comprehensive documentation at an appointment with a Disability Officer. Students with a disability are encouraged to contact the Disability Office at the earliest possible time, to meet staff and learn about the services available to meet your specific needs. Please note that late notification or failure to disclose your disability can be to your disadvantage as the University cannot guarantee support under such circumstances.
Additional subject information
Subject curriculum
-
Lecture 1 - Introduction
This topic covers an introductory discussion on 'Structures', structural engineering and the aims and objectives of this subject.
SLOs included
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 2 - Forces and Equilibrium
This topic introduces a lot of fundamental concepts to the understanding of engineering basics including forces, equilibrium equations, support conditions and the idea of stress and strain.
SLOs included
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 3 - Materials
This topic introduces the primary structural materials that are used in the construction industry. The advantages and disadvantages of these are also discussed. A number of developing materials are introduced as possible future alternatives.
SLOs included
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 4 - Design Actions
This topic introduces the design actions imparted on a structure and how these are determined and considered in appropriate load combinations.
SLOs included
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
- Understand the basis of the structural design of concrete, steel and timber elements and be able to do simple calculations relating to the design of such elements.
- Understand how trusses perform and be able to perform basic calculations to discover the forces within truss elements.
- Understand how multi-storey buildings behave structurally.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 5 - Tension and Compression members
This topic introduces the concept of tension and compression members.
SLOs included
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
-
Lecture 6 - Beam Action
This topic covers the concept of bending in structural members. This includes discussions of bending moment diagrams and shear force diagrams.
SLOs included
- Understand the properties of different foundation materials and be able to design simple footings and retaining walls to suit.
- Understand how multi-storey buildings behave structurally.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 7 - Trusses and Sustainability
This topic introduces trusses and teaches the determination of internal forces inside members that make up 2D truss systems. This topic also covers the concept of sustainability and how it is related to structural engineering.
SLOs included
- Understand the basis of the structural design of concrete, steel and timber elements and be able to do simple calculations relating to the design of such elements.
- Understand how trusses perform and be able to perform basic calculations to discover the forces within truss elements.
-
Lecture 8 - Stability
This topic introduces the concept of stability and considers this aspect of structures from a local and global perspective.
SLOs included
- Be able to determine bracing rquirements for residential buildings.
-
Lecture 9 - Reinforced Concrete
Given the dominance of this material in the construction industry, this topic delves deeper into the technical details and practical applications of this construction material. This includes a discussion of post-tensioned and pre-stressed concrete.
SLOs included
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
- Understand the basis of the structural design of concrete, steel and timber elements and be able to do simple calculations relating to the design of such elements.
- Understand how multi-storey buildings behave structurally.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 10 - Concrete flooring systems
An in depth discussion on the numerous variations of reinforced concrete floor systems. This includes considerations of a range of available options including various suspended in-situ concrete floors, slabs on grade and pre-cast systems.
SLOs included
- Understand the loads that impact on structures and be able to do simple calculations to show how these are resisted by structural elements.
- Understand the basis of the structural design of concrete, steel and timber elements and be able to do simple calculations relating to the design of such elements.
- Understand how multi-storey buildings behave structurally.
- Have some knowledge of the structural behaviour of other materials such as glass, bricks and prestressed concrete.
-
Lecture 11 - Footings and Foundations
This topic covers the ground conditions related to structures. It considers local ground conditions, possible ground improvements as well as the various footing systems available based on several job/project characteristics.
SLOs included
- Understand the properties of different foundation materials and be able to design simple footings and retaining walls to suit.